PUA-377 Standalone Access Control

PUA-377 Standalone Access Control


(1) Stand-alone or PC on/off-line operation system

(2) Built-in reader and provides an extra standard Wiegand

      input port for In/Out control

(3) 9.999 card holders with 4 digits I.D. and with card batch

      number check

(4) Cards can be added/deleted in single or block or range

      speedy by keypad directly or via PC. 

(5) Easy command codes for system programming by

      keypad directly or via PC

(6) Support alarm control system ARM / DISARM function

(7) TCP / IP available with external converter

(8) Auto power reset with watchdog timer and low power

      RTC design


Card typeEM
Pegasus cards / key tags125 kHz proximity card, key tag
Read range5 to 15 cm
Frequency / Modulation125 KHz / ASK
On-line interfaceRS-232C or RS-422 or RS-485. Web-based networking,
10/100 Mbps auto-sensing with external converter PC-T100
Inputs4 inputs for external reader, push button, door monitoring, burglary zone monitoring
Outputs4 outputs for door release, alarm, tamper switch, and door bell (optional)
MountingSurface mounting
Enclosure materialABS
Keypad4 x 3 numeric keypad
IndicatorsBicolor (red / green) and amber LEDs, multi-zone buzzer
Power supplyDC 12V / 150 mA
Operation temperature-20°C ~ 60°C
Humidity10% ~ 90% RH, Non condensation
Dimension (L) X (w) X (H)116 x 76 x 14 mm
4.57 x 2.99 x 0.55 inch
Weight250 g ±5%

* The specifications are subject to change without notice