AC-F44 (Standalone Access Control)

ACF-44 Standalone Access Control

• FEATURES

(1) Up to 500 users can be coded using Smart enroll

(2) A mounting template and installation kit are provided

(3) Suitable for Gang Box installations

(4) Powered either by transformer (AC) or regulated

      power supply (DC)

(5) IP65 water-resistant and UV-resistant

(6) Internal buzzer

(7) Two inputs: REX and Auxiliary

(8) Two tri-colored status/programming LEDs

(9) Ten auxiliary modes including: Door Ajar, Forced Door,

      Alarm shunt, and Door Monitor

(10) LED color control input

• SPECIFICATIONS*

ModelAC-F44
ELECTRICAL
CHARACTERISTICS
Operating Voltage Range12 to 24VDC (from a regulated power supply)
16 to 24VAC (from a transfomer)
Input CurrentStandby: 70 mA at 12VDC
Maximum: 145 mA at 12VDC
Relay OutputsLock Strike: Form C, 5 Amp
Auxiliary: Form C, 5 Amp
InputsREX: N.O., Dry Contact
Auxiliary (In/Monitor): N.O., Dry Contact
LEDsTwo tri-colored LEDs, with additional LED control feature
Proximity Card ReaderMaximum read range*: 80mm (3.15 in.)
Modulation: ASK at 125 kHz
Compatible cards: All 26-Bit EM Cards
OPERATIONAL
CHARACTERISTICS
Tamper OutputOpen Collector, active low 32mA max sink current
PIN-Codes8 formats supported: from single key up to 8-Digit PIN Codes
LED Control InputDry Contact, Normally-Open
Reader InputsSupports 2 Standard Wiegand 26-Bit Readers/Pin keypads
3 Security ModesThree modes of operation: Normal Mode/Bypass Mode/Secure Mode
Audio/VisualBuilt-in Sounder (bell, chime, siren)/Two tri-color LED indicators
ENVIRONMENTAL
CHARACTERISTICS
Operating EnvironmentSuitable for indoor and outdoor use (IP65)
Operating Temperature-12°C to 60°C (10°F to 140°F)
Operating Humidity0 to 95% (non-considering)
PHYSICAL
CHARACTERISTICS
Dimensions121mm (L) x 71mm (W) x 30mm (D) (4.72 in. x 2.80 in. x 1.17 in.)
Weight244 g(0.54 Ibs)

* The specifications are subject to change without notice